BEAD Bass Tuning

BEAD tuning is B E A D, from string 4 to string 1. Tune each string with the online tuner below, or tap a string on the headstock to hear its note.

  • Free, no sign-up
  • 4 strings
  • Lowest note B0
  • Mic stays on your device
BEAD A4 440 Hz

Press Start tuning, then play a string

0/4 tuned

BEAD notes

A4 = 440 Hz
String Note Frequency
4 B0 30.87 Hz
3 E1 41.20 Hz
2 A1 55.00 Hz
1 D2 73.42 Hz

About BEAD tuning

A 4-string bass tuned a fourth lower, like the lowest four strings of a 5-string.

  • Also called B standard.
  • Range: B0 (30.87 Hz) to D2 (73.42 Hz).

Intervals between strings

  • B → E perfect fourth
  • E → A perfect fourth
  • A → D perfect fourth

How to tune your bass to BEAD

  1. Start the tuner – BEAD Bass Tuning

    Start the tuner

    Press Start tuning and allow microphone access. The tuner is already set to BEAD.

  2. Play one string at a time – BEAD Bass Tuning

    Play one string at a time

    Let a string ring and watch the needle. Auto mode finds the closest string in BEAD tuning for you.

  3. Turn the peg until green – BEAD Bass Tuning

    Turn the peg until green

    Needle on the left means flat (too low), so tighten. Needle on the right means sharp (too high), so loosen. Green means the string is in tune.

Frequently asked questions

What are the notes of BEAD tuning?

From string 4 to string 1, BEAD tuning on the bass is B0, E1, A1, D2.

What are the string frequencies of BEAD tuning?

At the standard reference pitch of A4 = 440 Hz, the strings are tuned to B0 30.87 Hz, E1 41.20 Hz, A1 55.00 Hz, D2 73.42 Hz. If you change A4 in the tuner settings, every target changes too.

Can I tune to BEAD tuning without a microphone?

Yes. Tap a string on the headstock to hear its note and match it by ear. You can also switch on Repeat to hear the note every few seconds while you turn the peg.

Similar tunings

All bass tunings