Irish Tenor Banjo Tuning

Irish Tenor tuning is G D A E, from string 4 to string 1. Tune each string with the online tuner below, or tap a string on the headstock to hear its note.

  • Free, no sign-up
  • 4 strings
  • Lowest note G2
  • Mic stays on your device
Irish Tenor A4 440 Hz

Press Start tuning, then play a string

0/4 tuned

Irish Tenor notes

A4 = 440 Hz
String Note Frequency
4 G2 98.00 Hz
3 D3 146.83 Hz
2 A3 220.00 Hz
1 E4 329.63 Hz

About Irish Tenor tuning

Tuned like a fiddle but an octave lower, for traditional Irish music.

  • Range: G2 (98.00 Hz) to E4 (329.63 Hz).

Intervals between strings

  • G → D perfect fifth
  • D → A perfect fifth
  • A → E perfect fifth

How to tune your banjo to Irish Tenor

  1. Start the tuner – Irish Tenor Banjo Tuning

    Start the tuner

    Press Start tuning and allow microphone access. The tuner is already set to Irish Tenor.

  2. Play one string at a time – Irish Tenor Banjo Tuning

    Play one string at a time

    Let a string ring and watch the needle. Auto mode finds the closest string in Irish Tenor tuning for you.

  3. Turn the peg until green – Irish Tenor Banjo Tuning

    Turn the peg until green

    Needle on the left means flat (too low), so tighten. Needle on the right means sharp (too high), so loosen. Green means the string is in tune.

Frequently asked questions

What are the notes of Irish Tenor tuning?

From string 4 to string 1, Irish Tenor tuning on the banjo is G2, D3, A3, E4.

What are the string frequencies of Irish Tenor tuning?

At the standard reference pitch of A4 = 440 Hz, the strings are tuned to G2 98.00 Hz, D3 146.83 Hz, A3 220.00 Hz, E4 329.63 Hz. If you change A4 in the tuner settings, every target changes too.

Can I tune to Irish Tenor tuning without a microphone?

Yes. Tap a string on the headstock to hear its note and match it by ear. You can also switch on Repeat to hear the note every few seconds while you turn the peg.

Similar tunings

All banjo tunings